Influence of aliphatic polycarbonate middle block on mechanical and microstructural behaviour of triblock copolymers based on poly(l‐lactide) and polycarbonate

Three different ABA‐type triblock copolymers each containing biodegradable aliphatic polycarbonate as the middle block and poly(l ‐lactide) as the outer blocks were synthesized and the influence of the methylene chain length of the aliphatic polycarbonate middle block on various properties of the triblock copolymers was evaluated. Differential scanning calorimetry and wide‐angle X‐ray diffraction studies revealed that the incorporation of the outer blocks reduced the crystallinity of the middle aliphatic polycarbonate block. Variation of methylene chain length of the middle block led to a change in morphology from spherical to cylindrical as evidenced from atomic force microscopy studies. In addition, the mechanical properties of the block copolymers showed semi‐ductile to quasi‐brittle behaviour depending upon the composition of the middle block which was also confirmed using scanning electron microscopy. Dynamic mechanical analysis of the triblock copolymers indicated that storage modulus increased with a decrease in methylene chain length. © 2018 Society of Chemical Industry     

Self-doped N-propansulfonic acid polyaniline-polyethylene terephthalate film used as active sensor element for humidity or gas detection

In this work, we report the fabrication of sensors’ element for humidity or gases, prepared by in situ polymerization of aniline N-propansulfonic acid using ammonium persulfate in acidic medium. The polymer is being used in the form of powder or deposited in multiple layers onto the PET film. Various techniques including Fourier Transform infrared (FTIR), ultraviolet-–visible spectroscopy (UV–vis), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to characterize the as-prepared sensing materials. The film has been tested for humidity influence, where the significant variations in electrical characteristics were observed, suggesting its usefulness for humidity sensors. Also, for different organic and inorganic gases, a relatively low operating temperature and important sensitivity were observed that indicate its applicability as an active element for general gases sensors. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47743.     

Customers segmentation in eco-friendly hotels using multi-criteria and machine learning techniques

This study aims to investigate the travellers' choice behaviour towards green hotels through existing online travel reviews on TripAdvisor. Accordingly, a method combining segmentation and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) techniques was developed to segment travellers based on their provided reviews and to prioritize green hotel attributes based on their level of importance in each segment. The data were taken from travellers' online reviews of Malaysian eco-friendly hotels on TripAdvisor. The results showed that the sleep quality was one of the most imporant factors for eco-hotel selection in the majority of segments. The developed method in this study was able to analyse travellers’ reviews and ratings on eco-friendly hotels to identify the future choice behaviour and aid travellers in their decision-making process. The study provides new insights for hotel managers and green policy makers on developing environmental-friendly practices.     

Methylcyclohexane production under fluctuating hydrogen flow rate conditions

Energy storage using liquid organic hydrogen carrier (LOHC) is a long-term method to store renewable energy with high hydrogen energy density. This study investigated a simple and low-cost system to produce methylcyclohexane (MCH) from toluene and hydrogen using fluctuating electric power, and developed its control method. In the current system, hydrogen generated by an alkaline water electrolyzer was directly supplied to hydrogenation reactors, where hydrogen purification equipment such as PSA and TSA is not installed to decrease costs. Hydrogen buffer tanks and compressors are not equipped. In order to enable MCH production using fluctuating electricity, a feed-forward toluene supply control method was developed and introduced to the system. The electrolyzer was operated under triangular waves and power generation patterns of photovoltaic cells and produced hydrogen with fluctuating flow rates up to 7.5 Nm³/h. Consequently, relatively high purity of MCH (more than 90% of MCH mole fraction) was successfully produced. Therefore, the simplified system has enough potential to produce MCH using fluctuating renewable electricity.     

Understanding attitudes of hydrogen fuel-cell vehicle adopters in Japan

As of January 2021, Japan had the world's largest hydrogen station network with merely 4600 hydrogen fuel-cell vehicles (HFCVs) on roads, as compared to the 9000 HFCVs in the US, with only one-third of the hydrogen refueling stations in Japan. To understand behavioral differences among Japanese adopters, we administered a survey, in cooperation with public and private sector stakeholders, involving 89 private HFCV adopters in the Aichi Prefectural region, which hosts the largest number of HFCVs and refueling stations in Japan. Results suggest that HFCV adopters have a higher socioeconomic status than non-adopters, are mostly male in their 50s and above, and have a higher interest in new vehicle fuel technology. HFCV adopters who leased and bought vehicles were similar in terms of socioeconomic status, with differences in attitudes toward governmental incentives. The lack of refueling stations and station business hours restrict HFCV adopters from continuing with this fuel technology.     

Evaluation of China's new energy vehicle policy texts with quantitative and qualitative analysis

As one of the strategic emerging industries, the new energy vehicle (NEV) industry receives strong support from the Chinese government. The Chinese government has formulated a large number of policies to promote the development of NEV industry. Evaluating and analyzing the NEV policies are of great significance for improving policy formulation. In this study, we comprehensively analyze 253 NEV policy texts by employing quantitative and qualitative methods. We present the policy instrument types and semantic structure characteristics of policy texts based on the content analysis. The advantages and disadvantages of policy texts are identified by using a quantitative evaluation model. Our results show that the most frequently used policy instrument is regulatory, and the main policy objective is the demand-pull. The policies with higher scores are more comprehensive. Three suggestions are put forward to improve NEV policies.     

Malaysia’s electricity market structure in transition

The Malaysian electricity industry evolved from a vertically integrated utility into a single-buyer model, which considered a precursor to deregulation and a competitive market. This study considers electricity sector reform in Malaysia and proposes a market structure for the industry. We focus on the single-buyer model and the pool model for the analysis with the recommendation on reform stages required to ensure a smooth and successful market transition. A smooth transition from regulated market into deregulated market will ensure market stability and sustainability of the energy market. It will also provide enough time for the market participants to adapt and transit from regulated to deregulated energy market.     

Gas‐phase removal of indoor volatile organic compounds and airborne microorganisms over mono‐ and bimetal‐modified (Pt,Cu, Ag) titanium(IV) oxide nanocomposites

The photocatalytic deactivation of volatile organic compounds and mold fungi using TiO₂ modified with mono‐ and bimetallic (Pt, Cu, Ag) particles is reported in this study. The mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide photocatalysts were prepared by chemical reduction method and characterized using XRD, XPS, DR/UV‐Vis, BET, and TEM analysis. The effect of incident light, type and content of mono‐ and bimetallic nanoparticles deposited on titanium(IV) oxide was studied. Photocatalytic activity of as‐prepared nanocomposites was examined in the gas phase using LEDs array. High photocatalytic activity of Ag/Pt‐TiO₂ and Cu/Pt‐TiO₂ in the reaction of toluene degradation resulted from improved efficiency of interfacial charge transfer process, which was consistent with the fluorescence quenching effect revealed by photoluminescence (PL) emission spectra. The photocatalytic deactivation of Penicillium chrysogenum, a pathogenic fungi present in the indoor environment, especially in a damp or water‐damaged building using mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide was evaluated for the first time. TiO₂ modified with mono‐ and bimetallic NPs of Ag/Pt, Cu, and Ag deposited on TiO₂ exhibited improved fungicidal activity under LEDs illumination than pure TiO₂.